Ken Smith CR6MG Natural
Ken Smith CR6MG Natural
SETUP & INSPECTED BY OUR TECH TEAM
Weight: 11.0 lbs
Case Details: Original Gigbag
Year: 2022
Cosmetic Condition: Very good condition. Some scratching on the pickups, a few indentations on the side near the input jack and lower horn, as well as. a small area of buffing from play wear in the satin finish below the strings. Small crack under one of the tuning machines
Tech Notes: Bass, Hardware, and Electronics were cleaned/tested and are functioning appropriately. Setup with minimal neck relief and medium low action. Fretboard cleaned and Frets polished. No evident fret wear. Playability and intonation are spot on throughout the entire fretboard
Mods or Repairs: Original truss rod nut was replaced with Fender Bullet 1/8" truss rod nut.
SPECIFICATIONS
Neck Profile: Slim D
Neck Thickness: 1st - 0.81" / 12th - 0.92"
Fingerboard Radius: 20"
Nut Width: 2 1/8"
Scale Length: 34"
Electronics Layout: Volume, Blend, Treb, Mid, Bass (Internal DIP switches for frequency band changes)
String Gauge: 32 - 127
String Spacing: 18 mm (11/16")
Tools Included: Truss Rod Tool included
Original: $3,699.99
-70%$3,699.99
$1,110.00
Description
Ken Smith CR6MG Natural
SETUP & INSPECTED BY OUR TECH TEAM
Weight: 11.0 lbs
Case Details: Original Gigbag
Year: 2022
Cosmetic Condition: Very good condition. Some scratching on the pickups, a few indentations on the side near the input jack and lower horn, as well as. a small area of buffing from play wear in the satin finish below the strings. Small crack under one of the tuning machines
Tech Notes: Bass, Hardware, and Electronics were cleaned/tested and are functioning appropriately. Setup with minimal neck relief and medium low action. Fretboard cleaned and Frets polished. No evident fret wear. Playability and intonation are spot on throughout the entire fretboard
Mods or Repairs: Original truss rod nut was replaced with Fender Bullet 1/8" truss rod nut.
SPECIFICATIONS
Neck Profile: Slim D
Neck Thickness: 1st - 0.81" / 12th - 0.92"
Fingerboard Radius: 20"
Nut Width: 2 1/8"
Scale Length: 34"
Electronics Layout: Volume, Blend, Treb, Mid, Bass (Internal DIP switches for frequency band changes)
String Gauge: 32 - 127
String Spacing: 18 mm (11/16")
Tools Included: Truss Rod Tool included
