2015 Palir Skinny Titan Semi-Hollow Medium Tinted Finish Relic
2015 Palir Skinny Titan Semi-Hollow Medium Tinted Finish Relic
SETUP & INSPECTED BY OUR TECH TEAM
Weight: 6.8 lbs
Case Details: Original Hardshell Case
Cosmetic Condition: Very good with some wear throughout from factory relic.
Tech Notes: Guitar, Hardware, and Electronics were cleaned/tested and are functioning appropriately. Setup with minimal neck relief and medium/low action. Fretboard cleaned and frets polished, with no evident fret wear. Plays evenly throughout the entire neck with consistent intonation.
Mods or Repairs: When we received the guitar there was an improper shim installed in the neck which caused a "lift/hump" where the fretboard meets the body. We cleaned this neck pocket out and added a stew mac tapered shim to properly adjust the neck angle. We then needed to do a partial level from frets 13+ to address the issue of the "lift/hump". Frets were re-crowned and polished. Original nut also needed to be removed and we installed a new bone nut.
SPECIFICATIONS
Neck Profile: Medium C
Neck Thickness: 1st - 0.98" / 12th - 0.99"
Fingerboard Radius: 10"
Nut Width: 1 5/8"
Scale Length: 25 1/2"
Electronics Layout: Volume, Tone, 3-Way Pickup Switch
String Gauge: 9 - 42
Tools Included: No
Original: $1,899.99
-70%$1,899.99
$570.00
Description
2015 Palir Skinny Titan Semi-Hollow Medium Tinted Finish Relic
SETUP & INSPECTED BY OUR TECH TEAM
Weight: 6.8 lbs
Case Details: Original Hardshell Case
Cosmetic Condition: Very good with some wear throughout from factory relic.
Tech Notes: Guitar, Hardware, and Electronics were cleaned/tested and are functioning appropriately. Setup with minimal neck relief and medium/low action. Fretboard cleaned and frets polished, with no evident fret wear. Plays evenly throughout the entire neck with consistent intonation.
Mods or Repairs: When we received the guitar there was an improper shim installed in the neck which caused a "lift/hump" where the fretboard meets the body. We cleaned this neck pocket out and added a stew mac tapered shim to properly adjust the neck angle. We then needed to do a partial level from frets 13+ to address the issue of the "lift/hump". Frets were re-crowned and polished. Original nut also needed to be removed and we installed a new bone nut.
SPECIFICATIONS
Neck Profile: Medium C
Neck Thickness: 1st - 0.98" / 12th - 0.99"
Fingerboard Radius: 10"
Nut Width: 1 5/8"
Scale Length: 25 1/2"
Electronics Layout: Volume, Tone, 3-Way Pickup Switch
String Gauge: 9 - 42
Tools Included: No
